Menu

ThinkPad X390 Laptop Base Cover Assembly Replacement

0 Comment



Hello everyone, I’m Mike with Lenovo and I’m here today with the ThinkPad X390. Today we’re going to be replacing the base cover assembly. The process will take about five minutes and it should be easy enough for anyone to do. The only tool required is a Phillips screwdriver. Before we continue we need to make sure we’re protected against electrostatic discharge or ESD. Make sure to shut down the computer and disconnect all cables and accessories from the system. For further information watch our understanding electrostatic discharge video by clicking the link in the description. We can now place the system on a hard flat surface in order to begin. Let’s get started. Disconnect the power adapter. Press the power button to power on the system. Tap the F1 key repeatedly to enter the BIOS setup menu. Use the right arrow key to navigate to the Config menu. Use the down arrow key to navigate to the Power menu and press Enter Navigate down to the Disable built in battery menu and press Enter. Make sure yes is selected and press Enter. The built-in battery is now disabled. Loosen the five captured screws. Pry up along the back edge to unlock the clips. Remove the base cover assembly from the system. Align the base cover assembly with the system. Press down around the edges to lock the clips. Tighten the five captured screws.

Tags: , , , , , , , , , , , , , , , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *